If the front ring is more the 1/2 inch from the turret knob, the paralax adjustment may be able to be adjusted. This is even the rings are properly torked. Moved the ring as tech suggested and no problem.
Not be adjusted
So the front scope ring is supposed to be within a half inch of the top turret? And why is that?
when the front ring is toward the front of the scope like Usual place it is located the paralax knob would only rotate from 60-300. I moved the front ring to within 1/2 inch of touching the housing of the turrets the paralax move the full rotation. The ring was torked to 18 in/pounds in both cases. The guy at Burris tech could not tell me why.
Extremely weird