On the podcast last week, I mentioned that the best way to do load development is to simply see what the “herd knowledge” best load is. Find what other shooters are receiving good results from and try that load to start. The question then, is how to get the best loads unless you have lots of the top shooters in the world in your contacts list. Lucky for us, I do
With that have looked into the 6 max cartridge at all, it performs better than a 6 arc and has better feeding. Was wondering if you were wanting to get into it?
I have started with 180 eldm and h4831sc. Shoots good groups (only 50 rounds total through the barrel so far) but speed is only 2705 with 26” CRB barrel.. Got room to go to a hotter load but was curious what bullets and powders others are shooting. Shooting long range (up to 2200 yds) with this.
180 eld-m n560 60.0 gr. Coal is 3.15. I use a tikka action setup in their long action configuration. Mcgowen 30” barrel. Velocities are in the 2900s. Probably have room to go hotter if I wanted but it’s accurate. I can hit pretty consistently out to 1000 which is as far as I currently have access to.
the 180 and 183 SMK hpbts I do 60.0 gr of n560 as well. Haven’t honed these in as much yet as I started out shooting the 180 eld ms. But they seem promising
195 elite hunter Berger is another one I’m playing with. Also using n560 maybe 59.5 but I don’t remember off the top of my head and I’m traveling. Bergers are just so expensive but they are so so accurate.
I have another 7 SAUM 22” hunting rifle. For that I load 175 eld-x with 61.5 gr of n560 and although accurate, it’s too hot. Velocities are 2930-2950ish. I need to probably back it off some.
Thanks, I will give it a try but have to keep it to short action lengths at the moment. May have to add a long action receiver and chassis the to fleet
Pieter Malan from Impact Shooting gave a load on his latest video on 22 creed. He used Varget, I believe, watch the video he did give measurements and quantities. Plus it clearly shoots well.
When I initially started I was using n565. It was accurate but a tinch slower than n560. But I’d avoid it if you’re staying within SAAMI OAL as you could run into compressed loads. Never have had issues with case capacity with n560.